Stock Available GB 38CrMoAl JIS SACM645 Engineering Steel Hot Rolled Steel

Stock Available GB 38CrMoAl JIS SACM645 Engineering Steel Hot Rolled Steel - Image 2

Stock Available GB 38CrMoAl JIS SACM645 Engineering Steel Hot Rolled Steel - Image 3

Stock Available GB 38CrMoAl JIS SACM645 Engineering Steel Hot Rolled Steel

Model:38CrMoAl Alloy sheet
Brand:SHUNBEI
MOQ:10 TON
38CrMoAl is a nitrided Alloy Steel with high wear resistance, high fatigue strength and high strength.

38CrMoAl steel application parameters:

Product Name	Stock Available GB 38CrMoAl JIS SACM645 Engineering Steel Hot Rolled Steel
Length	Coils are in rolls packing, bigger rolls, smaller rolls acceptable; As required.
Width	1250 or 1530mm
	1219 or 1500mm (Slit Edges)
	Narrow width is Strips, if you need, pls just contact us for more.
Thickness	0.2mm-5mm (CR); 2.7-100mm (HR) or as required
Standard	AISI,ASTM,DIN,JIS,GB,EN,etc. ;
Technique	Hot rolled (HR) or Cold rolled (CR)
Thickness Tolerance	-0.05-0.07mm or 0.75-0.1mm or -1%
Main Grades	10# 20# 35# 45# 50# 60# Q345B Q345C Q345D Q345E,Q235B Q235R Q355B ST12 ST37 ST52 etc.

38CrMoAl Steel Chemical Composition:

Element	Composition (%)
C	0.35～0.42
Si	0.20～0.45
Mn	0.30～0.60
S	≤0.035
P	≤0.035
Cr	1.35～1.65
AI	0.70～1.10
Ni	≤0.30
Cu	≤0.30
Mo	0.40~0.55

Product Description

38CrMoAl is a high-grade nitriding steel. On the basis of ordinary carbon Bai plain steel, nitrogen atoms are infiltrated into the surface layer of the workpiece in a certain medium at a certain temperature, so as to obtain the characteristics of high wear resistance, high fatigue strength, high strength, corrosion resistance and high temperature resistance.

Application

It is mainly used for nitriding parts with accurate size after heat treatment, or various nitriding parts with low impact load and high wear resistance, such as mould imitation, cylinder liner, gear, high pressure valve, boring bar, worm, grinder spindle, etc., but the parts with larger size should not be used.